MODEL SPACE

Four-pane window

Exploded view

Drag or use arrow keys to orbitSwipe sideways to orbit

2D DRAWING / W1

Frame

50 × 60 mm

INSPECTOR

W1 · TRACE 1

Use the blue measurements and match each numbered mark to its instruction.

Exact coordinates and edge lengths

Measure from the lower-left corner of the blank. X runs right and Y runs up. The tables have their own row numbers. Join the outer edges in order.

Tabs, flaps and openings
Mark	Feature	X, Y in mm	Dimensions in mm
1	Pane opening	7, 7 · Lower-left corner	Width 15.5 · Height 20.5
2	Pane opening	7, 32.5 · Lower-left corner	Width 15.5 · Height 20.5
3	Pane opening	27.5, 7 · Lower-left corner	Width 15.5 · Height 20.5
4	Pane opening	27.5, 32.5 · Lower-left corner	Width 15.5 · Height 20.5

Outer cut edges
Edge	From X, Y	To X, Y	mm
1	0, 0	50, 0	50
2	50, 0	50, 60	60
3	50, 60	0, 60	50
4	0, 60	0, 0	60

Print at 100% / Actual size

Use A4. Turn off “Fit to page” and browser headers and footers. Check the 100 mm ruler before cutting.

PAPER SPACE

A4 PORTRAIT

PREPARE

BOARD PROFILE

0.5 mm thick

Reused boxLook for clean, dry 0.5 mm solid paperboard.
See usable box types
Look for 0.5 mm solid paperboard. Lay the full-size template on a flat panel before cutting.
- Coke or Pepsi multipackLook for a flat, solid edge. Use a large panel clear of handle holes.
- Cereal boxTry the broad front or back panel. Measure away from the glued seam.
- Cracker or snack boxCheck for a wide, uninterrupted panel. Small boxes may be too narrow for the full template.
- Other folding cartonA dry goods or retail carton can work if the edge is solid and the thickness matches.
Craft knife & matUse a mat under the board while cutting.
Pencil & rulerTrace the patterns and use a ruler to guide the straight cuts.
A4 templatesPrint at 100% and check the 100 mm ruler before tracing.

Check the cut edge. Look for a thin, solid edge with no wavy layer. The whole blank needs a flat area of 50 × 60 mm. Check the board →

Trace the four inside rectangles and the outside edge. Keep the border and crossbars connected.

Test an inside cut on a scrap of your board before cutting the frame.